Trailer Bunk Padding

Why Choose Our Boat Trailer Bunk Padding?

Every time you load your boat, the hull rests on the bunk boards. Our trailer bunk padding consistently helps protect your hull and the contact points on your bunk boards during loading, unloading, and towing.

Helps Protect Your Hull

Padding creates a layer that helps prevent scuffs and protects areas where your boat rests on the bunk boards.

Marine Carpet Built for Bunk Boards

You need a bunk surface that protects where your hull meets the trailer. Our padding uses marine carpet with strong marine rubber backing, giving your bunk boards a better surface for your boat.

Cut to Fit Your Trailer Setup

Trailers often have different bunk lengths. You can cut our padding to fit your trailer's bunk boards.

Made for Repeated Trailer Contact

Your hull touches the same bunk spots every time you use your trailer, at the ramp, in storage, and on the road. Extra padding helps protect these areas.

What Our Trailer Bunk Padding Is Made Of

Our trailer bunk padding features marine carpet on top and high-grade marine rubber backing underneath. Here are the important details about the surface, backing, and custom sizing options.

• Material: Marine carpet forms the surface of the trailer bunk padding.
• Backing: High-grade marine rubber backing sits below the carpet layer.
• Surface feel: The contact surface of the bunk board is carpeted.
• Surface contact: The area of the bunk board where your boat rests on the trailer.
• Custom sizing: Available when your bunk setup falls outside standard options.

Use these details to compare our product with your setup. For custom sizing, contact us now and get your perfect fit!

Specifications

Our trailer bunk padding comes in several colors, widths, and lengths. Check the material, backing, and available sizes in the table below before ordering.

Need a Custom Size for Your Bunk Boards?

Some trailers have unique bunk layouts. If you need a custom size, let us know your bunk board width, length, and quantity. We will provide a quote based on your trailer's setup. This is the best option when standard sizes do not fit.

Best Uses for Boat Trailer Bunk Padding

Our boat trailer bunk padding fits bunk boards on trailers. It works for both standard and custom layouts.

• Boat trailers
• Bunk boards
• Bunk replacement
• Custom bunk layouts

This padding fits most trailers with bunk boards. If your trailer has an uncommon layout, we can create a custom size for you.

How to Choose the Right Trailer Bunk Padding Size

Choosing the right trailer bunk padding starts with measuring your bunk boards. Once you know the width and length, you can select the best size for a proper fit.

Getting the right fit means covering your bunks without having to buy extra padding. Our stocked sizes range from 8 to 24 inches wide and 12 to 100 feet long, so use your measurements to guide your choice.

1. Measure bunk width. Measure the width of each bunk board. Match the padding width to the area you want to cover.
2. Measure bunk length. Measure each bunk board from end to end. If your trailer has boards of different lengths, measure each one before ordering.
3. Count your bunks. Count how many bunk boards you need to cover. For a standard pair, ensure your total length covers both boards.
4. Verify against stock sizes. Compare your measurements to stocked sizes, including 8" x 12', 12" x 12', and 50' or 100' lengths in 12", 18", and 24" widths. If your trailer needs a different fit, request a custom quote.

If your bunk board sizes do not match our listed options, contact us for a custom size and quote. Share your width, length, and quantity, and we will help you find the best fit.

How to Install Trailer Bunk Padding

To install trailer bunk padding, start by cleaning the bunk boards and measuring carefully. Remove the old covering before cutting the new padding. Place the new material, secure it, and trim for a clean finish.

What you will need:

• Sharp utility knife or blade
• Sandpaper
• Screwdriver
• 1/4" notched trowel
• Adhesive, if your installation method uses it
• Heavy roller or the back of a push-broom for stronger contact

1. Remove the old bunk covering. Remove the old bunk carpet or padding. Scrape off as much leftover adhesive as possible to leave the surface smooth before adding the new padding.
2. Measure each bunk board. Measure each bunk board before cutting the new padding. If your trailer has boards of different lengths, measure each one. If the old material still holds its shape, use it as a template.
3. Cut the padding. Cut the new padding with an extra inch or two at first. Place it on the bunk board, then trim it to fit once it is aligned.
4. Place and secure the padding. Lay the cut padding on the bunk board and smooth it out. Secure it using your preferred method, then press it flat so it makes full contact with the surface.
5. Trim and inspect before launch. Trim any excess material with a sharp utility knife once the fit is right. Look for loose edges, wrinkles, or exposed hardware before using your trailer again.

Trailer Bunk Padding vs Trailer Bunk Pads: What Is the Difference?

Trailer bunk padding and trailer bunk pads refer to two different products. Our padding uses marine carpet with high-grade marine rubber backing. Slide-style bunk pads use a slick plastic or composite surface instead.

Carpet-style padding is ideal if you want marine carpet over your bunk boards. It gives your trailer a carpeted surface instead of a slick one. Slide-style trailer bunk pads are for those who want more slip when launching. They have a surface designed for gliding, not carpeted coverage.

Trailer Bunk Padding Shipping and Return Details

We offer free shipping on every trailer bunk padding order. Orders ship within 3 business days, and shipping is available only to the lower 48 states. Returns are accepted for damaged or incorrect orders. Please inspect your padding before accepting delivery. You can also request free samples before you buy.